Link Lift Watch provides communication between lift cabin and hotline service (fi rst aid) via PSTN network. After pressing the Alarm button on the control panel in the lift cabin, the Link Lift Watch automatically dials up 6 preprogrammed number and establish connection with hotline service.
The Link Lift Watch can be programmed by PC.
The Link Lift Watch also allows a communication to machine room via the module LLW MR. Features ◊ The Link Lift watch is directly powered by the PSTN line or the PABX extension.
◊ The Link Lift Watch integrate an acoustic part (micro and speaker) in a compact case. The loudness of micro as same as speaker are adjustable independently.
◊ Anti-interference as same as protections against static electricity are built in.
◊ Link Lift Watch is programmable remotely by DTMF phone through PSTN or by PC (serial port RS232 or USB with converter to RS232).
◊ The unit integrates a Switchable relay that can be controlled remotely by phone. It allows the resetting of the lift system. Relay closing time is adjustable from 1 to 99 seconds.
◊ 2 LED are available to monitor the dialling. Yellow indicate that number is being dialled and green indicate that connection is ON.
◊ In addition to yellow and green LED status, you can through the speaker phone hear the progress tone of the call.
◊ Time duration of emergency button activation is adjustable from 0,5 sec to 5 sec.
◊ Link Lift Watch allows via a third wire, a communication with the Room Machine through the optional module ref: LLW MR
◊ The emergency button is protected against false alerts, it can be activated only when the lift is in failure mode.
◊ The universal inputs of Link Lift Watch allows you to be informed by phone or SMS if the lift has a problem (doors, power supply, etc.).
◊ All inputs and outputs contacts are galvanicaly isolated and do not depend on polarity (Except emergency button and third wire for machine room).
◊ Link Lift Watch allows 6 emergency numbers to be programmed (16 digits include *, #, pause, fl ash). The numbers are progressively dialled out when emergency button is activated.
◊ the LLW RM option module can automatically signal the status of the Machine Room, by calling a pre-programmed numbers every 1 to 10 days.  Data sheet
|
